46 In Gasser Ford Axle/Spindle/Brake Kit 5 on 4-1/2 Mopar Bolt Pattern

$845.98

COD: 6040a8b4b28d Categoria: Car Chassis & Suspension Kits

Descrizione

Product Summary

Universal Fit, Straight Axle Front Suspension Type

Old school gasser axle kit has a 46″ axle and features a 54-1/4″ hub-to-hub measurement, wheel mounting surface to wheel mounting surface
11″ vented rotors resist heat and brake fade and have a 5 on 4-1/2″ bolt pattern with 1/2″-20 studs
Features common ’78-’88 GM metric calipers with a 2-1/2″ bore, offers easy serviceability and proven performance
New Forged 4140 steel ’37-’48 Ford round back spindles provide strength and dependability for years of service
Universal design to fit multiple vehicle applications, will require welding and fabrication.

Installation Tips !

If using steel wheels with Wilwood kit, you will also need to purchase (2) steel shims part 835-3007500. These shims will prevent steel wheels from galling the aluminum hub.
Rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.

Details

These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2″ or 5 on 4-3/4″ bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Wilwood brake kit includes dual-drilled hub. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

46 inch

Note: Wilwood brakes increase hub-to-hub width by 1/2″.

Item Details

37-41 Ford Spindles, Specify bolt pattern,
46″ Wide axle – 54 1/4″ hub to hub.

Not For Off-Road Race Use

Charts

910-3546 Instructions (PDF)
Gasser Info (PDF)

Specs

Gasser Kit w/ “Ford” Spindles

Leaf springs, 31-1/4″ long x 1-3/4″ wide
- 6 leaf, 1/4″ thick
- 400 lbs/inch spring rate
Ford-style spindles (drop forged 4140 steel)
- Modeled after the 1937-41 round-back design
- Uses 1937-41 Ford king pins (included)

“Ford” Spindle Standard Brake Kit

5 x 4-1/2″ Ford/Mopar bolt pattern
- 11″ vented iron rotor, 1″ thick
- Hub flange (hat) diameter –
- 1/2″ Fine wheel studs
- GM Metric ’78-’88 calipers, 2-1/2″ piston
- 7/16″-20 banjo bolt to AN-3 line adapter kit
5 x 4-3/4″ GM bolt pattern
- 11″ vented iron rotor, 1″ thick
- Hub flange (hat) diameter – 6-1/4″
- 7/16″ Fine wheel studs
- GM Metric ’78-’88 calipers, 2-1/2″ piston
- 7/16″-20 banjo bolt to AN-3 line adapter kit

“Ford” Spindle Wilwood Brake Kit (must use 15″+ wheels)

Forged Dynalite 4-piston Calipers
11.00″ x .810″ Ultralite HP 30 Vane iron rotors
Wilwood BP-10 SmartPads – low noise, low dust
Lightweight anodized aluminum Pro Street hubs
1/2″-20 wheel studs

KEY SPECS
MFG. Part #	9103546-4 1/2
Brand	Elevemotors Motors
Front Suspension Type	Straight Axle
Suspension Height Adjustment	Stock Height
Control Arm Style	Not Included
Shock Type	Not Included
Spring Type	Leaf Spring
Finish	Natural
Bolt Pattern	5 on 4.5″
Rotor Diameter	11 Inch
Spindle Style	Ford Custom
Dropped Spindles	No
Dropped Axle	No
Dropped Control Arms	No
Front Leaf Spring Style	Semi-Elliptical Gasser
Spindles Included	Yes
Steering Included	Yes
Welding Required	Yes